Estimates, timing, finishes, care, and where we work — the answers homeowners and property managers ask before they call. If your question isn't covered, dial 480-470-7046 and we'll talk through it.
Request a Free EstimateCall 480-470-7046 or send a message through the contact page with a rough scope — driveway, patio, sidewalk, pool deck, or repair — plus your address in San Tan Valley or the surrounding area. We schedule an on-site walk, take measurements, and return a written estimate with the scope, finish, thickness, and price.
Yes. We don't charge to walk the site or to put together your quote. The number we hand you is the number you can plan around — no surprise pre-construction fees.
Pricing depends on square footage, finish (broom, smooth, stamped, decorative score), thickness, rebar or fiber-mesh reinforcement, and whether demo of an existing slab is involved. A standard residential driveway in San Tan Valley generally runs in line with our 2026 cost guide on the Resources page — exact numbers come back with your written estimate.
Yes. A deposit holds your spot on the schedule and covers materials staging. The balance is due once the slab is poured, finished, and you've signed off on the walk-through. We'll go over the deposit and payment schedule when you accept the estimate.
A standard driveway or patio pour runs one to three days on site once forms are set: prep and form one day, pour and finish the next, and a small punch-list day if needed. Larger commercial slabs, decorative finishes, or projects requiring saw-cuts and joints can run longer. We'll give you a day-by-day plan with your estimate.
Light foot traffic is generally fine after 24 hours. Heavier traffic and patio furniture can usually go on after about 72 hours. We ask homeowners to keep vehicles off a new driveway for at least seven days, and ideally closer to two weeks for full passenger-vehicle weight. Your crew lead will walk you through exact timing for your pour.
Yes — with adjustments. San Tan Valley winters are mild enough that cold-weather pours are routine; we time the pour to the warm part of the day and protect the slab if a cold snap is coming. Summer pours start early morning, use retarders or chilled water as needed, and get cured immediately to prevent flash-drying. There's a full write-up on cold-weather pours in our Resources section.
Site walk and estimate → scheduled start date → demo (if there's an existing slab) → grade and compact the subbase → set forms → lay reinforcement → pour, finish, and cut control joints → cure and clean up → final walk-through with you. Our Process page breaks each phase down in detail.
Broom finish (the standard for driveways and walkways — slip-resistant and clean-looking), smooth trowel, exposed aggregate, stamped patterns (slate, ashlar, cobblestone, wood plank), and decorative saw-cut scoring. We bring samples to the estimate so you can see and feel each option before committing.
Yes. Stamped concrete is one of our most-requested patio finishes — we cover why San Tan Valley homeowners pick it in detail on the Resources page. Stamping adds time to the pour and a per-square-foot premium over plain concrete; the trade-off is a hardscape that reads like stone or pavers without the joint maintenance.
Residential driveways are poured at 4 inches minimum, with 5 inches recommended where heavier vehicles park regularly. Patios and walkways are 4 inches. Commercial slabs and approach aprons get specced per the load. Every slab includes reinforcement — fiber-mesh or rebar — sized to the application.
Color and finish matching is possible on most jobs, though new concrete cures lighter than aged concrete and the two won't look identical for the first year or two. If a seamless match matters — for an addition or a patio extension — we'll talk through integral color, stains, and tooling options at the estimate.
Keep it clean, keep it sealed, and watch the joints. Rinse off spills and pet waste before they stain. Reseal every two to three years in our climate — Arizona sun is hard on sealer. Check control joints once a year; if a hairline crack appears at a joint, that's the joint working as designed. Our Resources page has a full cleaning and care write-up.
We typically recommend the first sealer coat 28 to 45 days after the pour, once the slab has cured fully and any surface moisture has worked out. After that, plan on resealing every two to three years in San Tan Valley — UV exposure here breaks sealer down faster than in cooler climates.
Yes. Every job ships with a written warranty covering the install — workmanship on prep, pour, finish, and joint placement. Hairline shrinkage cracks are normal in any concrete and aren't warranty defects; structural cracking through a slab is, and we come back to address it. We'll review the exact terms with your contract.
A properly installed residential driveway or patio in San Tan Valley should hold up 30 years or more with routine cleaning and resealing. Subbase prep is what decides longevity — soil conditions in this part of the Valley have specific quirks, which we cover on the Resources page. The pour is one day; the planning underneath it is what makes the slab last decades.
San Tan Valley and the surrounding East Valley communities — Queen Creek, Florence, Gold Canyon, Apache Junction, and parts of Mesa and Gilbert. Our Service Areas page lists every community we regularly work in.
Yes. Commercial driveways, parking pads, sidewalks, ADA-compliant ramps, and pad pours for outbuildings or equipment. The process is the same: site walk, written estimate, scheduled pour. The Commercial Concrete page has more detail.
For larger projects, yes — give us a call with the location and scope and we'll let you know if it makes sense. We're based in San Tan Valley (85143) and that's where the bulk of our work is, but the crew has worked across the East Valley for years.
Every site is different. If your project has a wrinkle these answers don't cover — a tight access, a tear-out, a finish you're not sure is doable — call and we'll work through it on the phone.